CMM Programming

1/9
If you can't describe as a process, you can't know what you are doing

W Edwards Deming

1Source Metrology offers expert CMM programming support (on-site or off-line) for virtually any CMM and software on the market.  Our combined expertise covers a very broad spectrum of equipment and software.  Software support includes Zeiss Calypso, Mitutoyo MCOSMOS, Hexagon PCDMIS, Renishaw Modus, Wenzel Quartis and Open DMIS, Nikon CMM Manager and Camio, Prolink QC-Calc/SPC/Gage.

CMM/Software Training

1/1
It is not enough to do your best; you must know what to do, and then do your best.

W Edwards Deming

We are strong believers that CMM training is most effective when done on your equipment, using your parts and drawings and tailored to your needs.  Why sit in a classroom for 5 days learning endless techniques on a generic training block, when you can have a custom training program, specifically designed and delivered to meet your exact needs.  Our goal is to leave you competent and confidant in whatever you need to accomplish.  This is how we advance, by sharing knowledge.

GD&T Training

1/2
Lack of knowledge... that is the problem.

W Edwards Deming

GD&T is the backbone of modern design and manufacturing, and having an understanding of this standard is critical to your success.  1Source Metrology has certified GD&T Professionals on staff to deliver comprehensive and effective training to your team, leaving you with a clear understanding of not only what the standard means, but how it translates to real world manufacturing and inspection.

Measurement System Consulting

1/7
A bad system will beat a good person every time

W Edwards Deming

Choosing the right equipment for your inspection lab can be a daunting task. With decades of experience in the measurement industry, our experts can help you make the right decisions on your next purchase.  Sit down with us and go through all of your projected parts, fixtures and inspection requirements and we will help you get the right size, probe selection and software options to not only do the job right out of the gate, but to ensure your upcoming parts will work too.  Take the regret out of choosing  a machine or a sensor that will not perform to your needs by trusting in 1Source Metrology.  We've measured it all!

© 2017 1Source Metrology Corp.

Bill Reilly

(905) 988-0165

Ray Xing 

(416) 543-9634

Don Mahon

(905) 220-1824

Jamie Zilinski

(226) 606-8731

  • 1Source Metrology