1 Source Metrology is a proud Canadian Renishaw partner!  Contact us to check out the latest in 5 Axis!

REVO 2

A highly accurate dynamic measuring head and probe system which maximises measurement throughput.

High-speed measurement...

  • Up to 500 mm/sec resulting in increased part throughput

  • Data collection rates up to 4,000 points per second

  • Infinite positioning and five-axis motion reduces non-productive transitions between features

  • Rapid calibration with all positions inferred means more time measuring

...with high system accuracy

  • 5-axis scanning minimises CMM motion and the associated dynamic errors

  • Stylus wear minimised by extremely low scanning forces

  • Infinite positioning and five-axis motion aid access to difficult features

  • Flexible tip sensing further adds to the systems' accuracy and flexibility

...and great flexibility

  • Maximum reach up to 800 mm from centre of head rotation

  • Multi-sensor probe and stylus changing capability

  • Renishaw UCCserver software application (based on I++ DME command protocol) provides the interface for REVO-2 control

  • The removable probe system, used in conjunction with a low cost changer, provides added system flexibility

PH20

PH20 - a dramatic impact on inspection timescales, capability and flexibility

  • PH20 brings 5-axis measurement capability to touch-trigger applications on all sizes of CMM

  • Increased throughput - up to 3x faster than indexing heads

  • Easy access to features at any angle with infinite positioning

  • Faster calibration

  • Integral industry standard TP20 probe

  • Improved touch-trigger metrology performance

  • Available on new CMMs or as a retrofit

Equator™ gauging system

The Equator gauging system enables process control by delivering highly repeatable, thermally insensitive, versatile and reprogrammable gauging to the shop floor.

Shop floor gauging

To control manufacturing processes on the shop floor, gauges have been used for decades, for example sets of callipers, go / no-go gauges or bore gauges. With advances in manufacturing, the need for new process control methods is increasing.

The Equator system is a flexible gauge, designed to provide speed, repeatability and ease of use for manual or automated applications, which is why hundreds of manufacturers worldwide are replacing their current gauging method with Equator systems.

© 2017 1Source Metrology Corp.

Don Mahon

Director/Sales

(905) 220-1824

Bill Reilly Director/Quality

(905) 988-0165